Laser engraving machine speed upgrade experience sharing
With economic development, the production and pursuit of the interests of efficiency, however, laser engraving machine industry is no exception. Only efficiency has been improved, can we talk about business interests, and the competitiveness of enterprises in the market. Guangzhou China Xiao Bian as we briefly laser engraving machine speed increase a few ideas and hope for the majority of all users.
We use laser engraving machine for user enterprises, the most important point is that according to the hardness of the material and carving engraving machine power to determine the extent of a sculpture. Which is what we usually say engraving depth problems. In fact, speed carving a major determinant of its own power laser tube bigger, more thick-cut, so if the same material, such as a centimeter of acrylic, the greater the power, the faster the laser tube, we can according to the actual case first roughing then finishing, roughing, removal of all possible margin, saving finishing time; better processing performance can also use the laser tube material. Performance laser engraving machine is not only reflected in the hardware configuration of the machine, we also need to accumulate a little bit of experience in processing, thereby improving operational efficiency.
How to solve the problem of laser engraving machine engraving dislocationLaser engraving machine normal operation, the problem often encountered is trouble carving dislocation problem, so that the product materials in the engraving process will be damaged unfortunately lost, which directly affect the efficiency of production and work.
The most important question we start starting material itself, for those irregularly shaped object was carved on the surface seems to have been fixed very tight, will be under pressure when subjected to shaking back and forth. At this point, you can try some of the waste in an object underneath it to increase friction. Check the sculpture chosen pliers or card head is wrong. Meanwhile, wear laser engraving machine pliers or chuck workpiece misalignment will cause the chuck pliers or if too tight, the head contact with carvings will lead to instant pop-carved objects. Packaging article comes retained, although irregularly shaped objects, but it is brought to its packaging may be very regular, and easy to be fixed, together with a strip of tape, irregularly shaped objects can easily be fixed. Try tool holder parts of its rules, and give up its irregular site.
Whether laser engraving machine, laser cutting machine, laser engraving cutting machine products, or imported laser engraving machine, as long as there are problems from reality, a careful analysis of the root causes of the problem, I believe we must also be able to solve.Laser engraving machine in the event of an electromagnetic interference problem, it will make it not work, and pollution power, causing the microcontroller and PC control systems can not communicate, causing serious microcontroller crash, caused difficulties for normal use, so interference must be resolved.
To solve this problem mainly from the following four aspects.1.use shielded cables to reduce outside interference on their own, or their own (power line) to outside interference2.power filter, the drive PE (ground) (driver and chassis floor insulation), the control pulse and direction pulse PULSE-DIR-short cable between the lead after the motor ground wire, the drive and the motor protective cover , shielded wire are connected to the drive chassis grounding screw on the wall and requires a good contact.3.try to increase the control cable and power cable (L, N), from the motor drive cable (U, V, W) between avoid cross, such as we are dealing with two dual-axis drive system in the same chassis Driver installation position, a drive plate forward, after the other towards, and in the structural arrangement of these leads as short as possible.4.installed power filter to reduce contamination of the AC power.
Properties and applications of quartz laser engraving machine Quartz cooked said glass, quartz glass laser engraving machine is a laser engraving machine, its level is mainly determined by the content of SiO2 present, quartz laser engraving machine in our broad range of applications. Performance characteristics of its machinery is mainly reflected in the following aspects.
1.glass laser engraving machine high power application quality assurance drive motor, long time stability. 2.emerald glass and some very very smooth, so the bed structure design is reasonable. Stable machining table move, inertia, processing speed, high accuracy. 3.imported high-precision ball screw drive. 4.glass engraving machine due to the hardness of the glass material is not small, so with a high-speed DC spindle motor. 5.automatic for the cooling water system.
Quartz laser engraving machine Application: Suitable be single body, milling bottom, 3D, relief carving and other operations on a variety of flat glass, marble and other hard materials. Access to structured, clear graphics and text. Applicable to all kinds of glass, lens processing industries and crafts industry.
Need Help!!!
Categories
Recent Post
Tag Cloud
About Reaying
Shandong Reaying Machinery Co., Ltd. is one of the leading laser machine manufacturers around the world since 2008 with a registered capital of 3 million yuan. It is a high-tech enterprise focusing on R&D...
Read More